Our #1 Competitive Moat ยท In-House Heavy Diesel Support

Dedicated On-Call Field Service Mechanics

Anyone can drop a digger off a float. What protects your margin on a Sydney civil site is who answers the phone and rolls a stocked service truck when a hydraulic hose blows at 9:30 AM.

Built Around Contractor Margins

In-House Heavy Diesel Mechanics. Zero Call-Centre Queues.

Most national hire chains rely on centralised call centres and third-party subcontractors to attend breakdowns. By the time a job ticket is logged and an external fitter arrives the next morning, your crew has lost a full shift, your concrete pump or tipper slots are blown, and your project margin is gone.

DL Plant Group operates our own workshop and stocked mobile field service trucks out of Banksmeadow and Kurnell. When you call 0476 206 677, you speak directly with the people who maintain the exact machine sitting on your job site.

Book Field-Backed Dry Hire Direct Dispatch: 0476 206 677
DL Plant Group mobile field service truck and 8T Yanmar in the Banksmeadow workshop
REAL BANKSMEADOW WORKSHOP + DL PLANT SERVICE TRUCK GREATER SYDNEY RESPONSE
Margin Protection Calculator

What Does One Mid-Shift Breakdown Cost Your Crew?

Adjust your crew numbers to see the real cost of waiting on an outsourced hire-chain mechanic versus DL Plant's in-house mobile service fleet.

4 crew
$95 / hr
$220 / hr
4 hrs
SINGLE-SHIFT DOWNTIME LOSS
$2,400

Burning $600 / hour while your crew stands around.

THE DL PLANT DIFFERENCE

Pre-checked between hires and backed by our own stocked Greater Sydney field service vans plus swap-out contingency.

Stocked Mobile Workshop Vans

Equipped To Fix 90% Of Field Faults On The First Visit.

Our mobile service trucks are kitted specifically for our Yanmar, Kobelco, Kubota, Hyundai, LiuGong, and Mecalac dry-hire fleet.

HYDRAULICS

Hoses, Fittings & Flat-Face Couplers

High-pressure JIC, BSP, and ORFS fittings, auxiliary hammer hoses, flat-face quick couplers, O-ring kits, and clean ISO hydraulic oil to resolve blown lines on site fast.

DIAGNOSTICS

Electrical & OEM Fault Scanners

Engine and hydraulic diagnostic readers, relays, fuses, pressure transducers, starter components, and replacement e-stop switches and rotating beacons.

ATTACHMENTS

Quick-Hitch, Pins & Hammer Tooling

Hitch retention pins, shims, grease guns, moil/chisel retaining hardware, and auxiliary relief checks for hydraulic rock breakers, augers, and diamond rock saws.

FILTRATION

Fuel, Air & Hydraulic Filters

Genuine primary and secondary fuel filters, water separators, air elements, and coolant top-ups to handle dusty Sydney sandstone and demolition environments.

UNDERCARRIAGE

Track Tensioning & Rollers

High-pressure grease rams, idler adjustments, and track-throw recovery tooling so rubber and steel tracked excavators stay planted on steep or rocky terrain.

CONTINGENCY

Priority Swap-Out Float Protocol

If diagnostics reveal a major internal pump, final-drive, or engine fault that cannot be turned around on site quickly, Banksmeadow dispatch triggers a priority machine swap.

Preventative Yard Maintenance

Our 28-Point Between-Hire Inspection Standard.

The best breakdown response is preventing the breakdown before the machine ever climbs onto the float.

Download Capability Statement (A4)
01. Hydraulic SystemsFull cycle test under load, boom/dipper/bucket cylinder seal check, auxiliary hammer line pressure check, zero-drip coupler verification, hydraulic oil level & cleanliness.
02. Engine & CoolingEngine oil & coolant levels, radiator core clean-out (critical on Sydney sandstone dust sites), fuel water-trap drain, air filter inspection, belt tension & battery load test.
03. Undercarriage & DriveRubber/steel track tension and wear check, sprocket & bottom roller inspection, final-drive oil check, dozer blade edge & slew-ring grease purge.
04. Quick Hitch & BucketsDual-locking hydraulic quick hitch latch & alarm verification, bucket teeth/cutting edge check, pin & bush tolerance check across GP, trench, and mud buckets.
05. Tier-1 Civil SafetyIn-cab & ground-level dual e-stop function test, battery isolator lockout, amber rotating beacon, reverse/travel alarm, fire extinguisher tag date, ROPS/FOPS decals.
06. Induction DocumentationCurrent Plant Risk Assessment, updated service logbook, operator manual, and fresh daily pre-start checklist book placed inside the cab prior to dispatch.
Zero-Friction Breakdown Protocol

What Happens The Moment You Call 0476 206 677.

STEP 01

Isolate & Call Direct

Park safe, hit the isolator if hydraulic oil is leaking, and call 0476 206 677 with the unit number and site suburb.

STEP 02

Immediate Mechanic Triage

Our heavy diesel mechanic identifies the exact hose size, fitting, or fault code before leaving the yard so we arrive with the right parts.

STEP 03

Mobile Van On Site

Stocked service truck dispatches from Banksmeadow or Kurnell via M1/M5/M8/M4 arterial routes straight to your job site.

STEP 04

Fixed Or Swapped Out

Machine is repaired, pressure-tested, and returned to work, or swapped via priority float if a major workshop repair is required.

Dry Hire FAQs

Field Service & Breakdown FAQs

How fast do DL Plant field mechanics respond to a Sydney breakdown?

Call our Banksmeadow dispatch line directly on 0476 206 677. A heavy diesel mechanic triages the fault immediately over the phone and dispatches a stocked mobile service truck from our Banksmeadow or Kurnell yard across Greater Sydney.

What happens if a machine cannot be repaired quickly on site?

If a major mechanical or component issue cannot be resolved on site within a short turnaround window, we prioritise a swap-out float from Banksmeadow so your operators and tippers stay productive.

Do you charge callout fees for mechanical faults during dry hire?

Genuine mechanical wear-and-tear faults are covered by DL Plant Group. Only accidental operator damage, contaminated fuel, or site-impact damage falls under the Hire Agreement / Damage Waiver terms.

Are your machines serviced between every hire or only on scheduled hours?

Both. Every machine receives OEM scheduled servicing plus a 28-point between-hire mechanical, hydraulic, grease, and Tier-1 safety inspection at Banksmeadow or Kurnell before it is released to the next job.

Can your field mechanics service hydraulic hammers and rock saws on site?

Yes. Our service vans carry flat-face couplers, auxiliary hoses, nitrogen test gear, and chisel/moil retention pins to keep both the carrier excavator and its hydraulic attachment working.

Call: 0476 206 677 Book Machine